Epoxy Patch

Concrete Patching Easymix 1:1

Epoxy Path Easymix

READY FOR USE
NO OFF RATIO MIXING
NO MESSY POWDERS
NO SLUMP PROBLEMS
EASY KNIFING COMPOUND

Preparation is vitally important for a successful floor painting project. The best possible surface can be achieved by filling the joints and any stress cracks that may occur. EPOXYPATCH is purpose designed to act as a structural, adhesive and joint and crack patching compound for concrete. It has an easy mixing putty consistency and is very easy to knife into joints. Paint over, once cured. Will bond to damp surfaces and cure in low temperatures to an extremely hard durable surface with negligible shrinkage.


A filled resin and hardener which, when mixed together, have a similar consistency and colour to new concrete. It is generally not possible to tell the difference between Epoxypatch and concrete.

MIXING RATIO
Use one part resin to one part hardener by volume. Use mixture within 30 minutes.

CURE
25-15C overnight. Total cure is over 3-4 days. Do not use in temperatures below 6C.

HOLD UP
In thick film. Very good. Non slump.

SOLIDS
100%

SHRINKAGE
Negligible.

CURED FORM
Inert. No residual toxicity.

Thoroughly mix the resin and hardener with a broad blade, 120mm available from EPG, blending on a flat surface. When thoroughly blended, material will be a uniform grey colour.

Remove all laitance and degrease work surface. Trowel onto area or cavity to be filled to the desired thickness. Avoid air entrapment. Working time is approximately 30 minutes at 20C.

Method for joints. With the broad blade, apply Epoxypatch liberally across the joint, then scrape off excess along the joint.

CLEAN UP
Use epoxy solvent, available from EPG, for clean-up of uncured or partially cured resin and utensils.

Do not store near boilers or other sources of heat. Do not store in direct sunlight. Tightly sealed containers will store in excess of one year.

500ml x 500ml = 1 litre pack
4lt x 4lt units = 8 litre pack

Handle with protective gloves, available from EPG. System is isocyanate free. Contains epoxide resin and amine hardener.